SKU : LCTCEDT01G
This Jono & Johno clutch demount tool will fit the Baumr-ag Models above. For easy removal of the clutch!
To use, remove the sprocket cover from your saw. Then remove the spark plug and fit the piston stop plug in it's place. Next, spin the clutch to rotate the engine so the piston is touching the piston stop. Then place the demount tool on top of the clutch so the three prongs on the clutch demount tool slot in the corresponding holes of the clutch and the bottom of the demount tool fit neatly and evenly flat on the top of the clutch. Finally, using a 19mm wrench and socket or spanner, spin the tool and clutch clockwise to remove the clutch.
Note: DOES NOT include replacement clutch. For the sepparate clutch, please see our listing here: https://www.chainsawspares.com.au/chainsaw-clutch-for-baumr-ag-sx62-62cc-chainsaw
Jono & Johno offers a 12-month warranty on most products.
We pride ourselves on selling good quality gear and will be fair and prompt in honouring our warranties. If you’re in trouble, we’ll help you out.
The exact warranty coverage depends on two factors:
Minor faults caused by the user
Minor faults caused by the manufacturer
Major faults caused by the manufacturer
Major faults caused by the user
If you need to return your product:
Some products are not covered by warranty, including:
If your product is out of warranty and has failed despite minimal use, contact us. We may assess it on a case-by-case basis. If a manufacturer defect is identified, we aim to be fair in resolving the issue—but this is at our discretion.
SKU | LCTCEDT01G | |
Model # | LCTCEDT01G | |
Barcode # | 682157262878 | |
Brand | JONO & JOHNO | |
Shipping Weight | 0.3000kg | |
Shipping Width | 0.115m | |
Shipping Height | 0.040m | |
Shipping Length | 0.163m | |
Unit Of Measure | ea | |
Assembled Length | 0.163m | |
Assembled Height | 0.040m | |
Assembled Width | 0.115m |