SKU : PJ91052
Used for removing chainsaw clutches on especific model chainsaws. This tool has a 19mm nut fitting so you can use it with a 3/8" socket or bar wrench.
Please read this description carefully, this tool does NOT fit all chainsaws.
Suits the following brands and models:
Husqvarna: 362 - 365 - 371 - 372 - 385 - 390 - 570 - 575 - 576
Jonsered: 2165 - 2171
To remove the clutch, you must turn it clockwise (opposite thread). Using a piston stop tool will also help to keep the engine from turning while you are trying to undo the clutch or trying to do it up again (we sell the piston stop in a separate listing).
Jono & Johno offers a 12-month warranty on most products.
We pride ourselves on selling good quality gear and will be fair and prompt in honouring our warranties. If you’re in trouble, we’ll help you out.
The exact warranty coverage depends on two factors:
Minor faults caused by the user
Minor faults caused by the manufacturer
Major faults caused by the manufacturer
Major faults caused by the user
If you need to return your product:
Some products are not covered by warranty, including:
If your product is out of warranty and has failed despite minimal use, contact us. We may assess it on a case-by-case basis. If a manufacturer defect is identified, we aim to be fair in resolving the issue—but this is at our discretion.
SKU | PJ91052 | |
Model # | PJ91052 | |
Barcode # | 681087043373 | |
Brand | Unbranded | |
Shipping Weight | 0.2750kg | |
Shipping Width | 0.050m | |
Shipping Height | 0.050m | |
Shipping Length | 0.050m | |
Shipping Cubic | 0.000125000m3 | |
Unit Of Measure | ea |