SKU : PJ91041
This is a Drill Accessory Kit to suit some Stihl chainsaws (see list of suitable models below).
Easy to install and it works very well. Comes with adjustable chuck and 12x230mm drill bit (you can also use your own drill bits). The largest drill that fits in the chuck is 12mm.
Kit does require a 3/8lp 6 tooth spur sprocket number 51570 (not included) to drive/spin the drill bit.
It simply bolts onto your stock saw. THIS UNIT HAS NO REVERSE.
Confirmed to suit the following STIHL models:
017 - 018 - 021 - 023 - 025 - MS170 - MS180 - MS210 - MS230 - MS250
PLEASE NOTE: CHAINSAW, BAR NUTS AND SPUR SPROCKET NOT INCLUDED!
YOUR CHAINSAW MUST BE FITTED WITH A 3/8lp 6 TOOTH SPUR SPROCKET DRUM FOR THIS KIT TO FIT!
IF YOUR UNIT DOES NOT HAVE THIS PLEASE USE PART NUMBER : 51570
WE CANNOT GARANTEE THAT THIS WILL FIT ANY OTHER MAKE AND MODEL CHAINSAW!
Jono & Johno offers a 12-month warranty on most products.
We pride ourselves on selling good quality gear and will be fair and prompt in honouring our warranties. If you’re in trouble, we’ll help you out.
The exact warranty coverage depends on two factors:
Minor faults caused by the user
Minor faults caused by the manufacturer
Major faults caused by the manufacturer
Major faults caused by the user
If you need to return your product:
Some products are not covered by warranty, including:
If your product is out of warranty and has failed despite minimal use, contact us. We may assess it on a case-by-case basis. If a manufacturer defect is identified, we aim to be fair in resolving the issue—but this is at our discretion.
SKU | PJ91041 | |
Model # | PJ91041 | |
Barcode # | 688187192819 | |
Brand | Unbranded | |
Shipping Weight | 1.9000kg | |
Shipping Width | 0.200m | |
Shipping Height | 0.120m | |
Shipping Length | 0.150m | |
Shipping Cubic | 0.003600000m3 | |
Unit Of Measure | ea |